Swift 1400 Hard Shell Rooftop Tent
THE HARD SHELL ADVANTAGE: The benefits of a hard shell rooftop tent really come into their own when looking at the convenience of set up and pack up as the hard shell cover itself forms a functional part of the tent’s construction. The hard shell allows for 1" of polystyrene insulation as well as gas assisted struts for an easy pop-up design.
SUPER FAST SET UP: Set up becomes a breeze with little to no structural poles to place; simply pop it open, roll out the ladder and you’re literally a few steps away from a good night’s sleep. Packing the tent back up is as easy as removing the flexi-rods, pulling down the lid, packing the collapsable aluminum ladder and closing the latches.
COMFORTABLE AND SPACIOUS: The Swift 1400 features a spacious 51.6" x 86.4" mattress made from a high-density foam and 3D anti-condensation mat that is 3 inches thick. With a total open height of 63.6" there is plenty of internal head room for sitting up for a game of cards or to simply get changed.
RUGGED DESIGN FOR ADDITIONAL MOUNTING: The hard outer shell features steel covered aluminum extrusions made for direct mounting of T-slot accessories for a dynamic mounting capacity of up to 110lbs (50kg). The tent is made from 280gsm ripstop poly-cotton fabric for peace of mind in wet and windy conditions. Each entry is complete with dual layer 120gsm fine mesh and poly-cotton screen. The front entry point is protected by a hooded awning.
UNIVERSAL MOUNTING: The Swift 1400 features a universal mounting solution that can be mounted onto a variety of crossbars. When closed this tent's footprint is 90" x 55.2" x 7.2"
Features:
- Set up and pack down as simple as it gets
- Extruded aluminum construction is suited for roof loads while the perimeter extrusion is suited for direct mounting of T-slot accessories
- Maximized internal head space over 58.8" at the peak
- An insulated roof, anti-condensation mat, large windows and additional mesh vents make for a luxurious abode
- 280gsm ripstop poly-cotton fabric
- Collapsable aluminum ladder
- Universal mounting solution for a variety of vehicle crossbars
Specifications
Gas Strut Assisted Hard Lid: | Yes |
Dimensions (closed): | 90.5" x 55.1" x 7.5" (2300 x 1400 x 190mm) |
Dimensions (open): | 90.5" x 55.1" x 64.2" (2300 x 1400 x 1630mm) |
Product Weight: | 215lbs (98kg) |
Lid Construction: | Steel covered aluminum extrusions with 23mm polystyrene insulated foam panel |
Base Construction: | Aluminum sheet & extrusions with honeycomb internal board |
Frame: | Extruded aluminum with reinforced nylon corners |
Mattress Size: | 86.4 x 51.6" |
Mattress Construction: | 3.1-inches thick |
Body Fabric: | 280gsm ripstop poly-cotton |
Waterproof Testing (mm): | 2000 water column |
Door Awning: | Yes |
Max Capacity: | 660lbs |
Ladder Construction & Rating: | Collapsible aluminum up to 330lbs |
Ladder Length: | Extended: 92" (233.7cm) Collapsed: 30.5" (77.5cm) |
T-Slot Dimensions: | Head Width: 0.55" (14mm) Slot Width: 0.31" (8mm) |